Repeaters

Please turn off any roger beeps in your radio because the repeaters produce a courtesy tone for end of transmission. Thank You

W4HPL Repeater

The W4HPL Repeater is using 147.210 with a + 0.600 MHz offset and a PL Tone of 107.2 RX and TX.

Access the repeater via Echolink - look for W4HPL-R which is node # 822060


MTEARS Repeater

The W4EOC MTEARS repeater is on 444.600 with a + 5.00 MHz offset and a PL Tone of 107.2 and is linked to the Nolensvillle Hub on 443.725 with a + 5.00 MHz offset and a PL tone of 107.2.

The repeater is a GE Master II repeater with an NHRC repeater controller with remote base on board.

Document explaining propagation in the VHF spectrum acts. Very informative document.

KK4TD-MMDVM (MultiMode Digital Voice Modem) (D-Star is W4HPL)

The Multi-Mode Digital repeater is on 145.110 -0.600 offset and PL 114.8 for Analog (need Tone Squelch of 114.8 to not hear digital).

MMDVM is a system for Analog, DMR, P25, D-Star and Yaesu System Fusion.

You need to use Color Code(CC) 1.

The following DMR "Talk Groups"(TG) are "Static"(or always connected):

Time Slot(TS) 1

31471 - TN NWS Memphis

31472 - TN NWS Skywarn MTEARS

31475 - TN TAC

31478 - TEMA

31604 - USA Area 4

31630 - STEM

31671 - Youth ARC

Time Slot(TS) 2

TG 2 is Local Cluster

TG 9 is local

3136 - New York TG (Statewide)

3147 - Tennessee TG (Statewide)

All other USA TGs are PTT or only active when you kerchunk the repeater with that TG.

Timed Static TG Connections

Sundays - Slot: 1 TG: 310 19:00 - 20:00 (TAC 310 Net)

Monday - Slot: 2 TG: 3106 23:00 - 00:30(Tuesday) (PAPA DMR Roundtable net)

Tuesday - Slot: 2 TG: 3148 18:00 - 19:30 (BrandMeister DMR Talk Group Net)

Wednesday - Slot: 1 TG: 311 19:00 - 21:00 (HamNation After Show QSO)

Wednesday - Slot:1 TG:31654 21:00 - 23:00 (Four State QRP Group)

At the present time XLX reflectors are turned off

Monitor this Repeater on Brandmeister

There is also XLX reflectors that we are connected to and by default the repeater connects to XLX950E but can be changed to XLX000 to XLX999 by Private Call to 68000 to 68999 and you connect to A to Z using a private call to 64001-64026 and disconnect using private call 64000 and Status using private call 65000(Voice confirmation).

All XLX reflectors are linked to TS1-TG6 after connection so you would talk on the XLX reflector that your connected to via TS1-TG6. The XLX reflector system is still in Beta but should be working well.

XLXHosts.txt can be viewed for current Hosts that can be connected to by converting to the appropriate private call to connect. Only those shown in the XLXHosts.txt are setup for connecting to.

If you just want to use the default XLX950 then you don't have to change the Host just the reflector A to Z.

If no RF activity for 10 minutes on the XLX reflector if it was changed from default then it will revert back to the default reflector of XLX950E.

If there is a TG that you can't seem to get working let us know and we will see what we can do for you.

Our Main connection is to Brandmeister and it's reflectors are accessed via TS1 TG6

All local traffic is on TS1-TG9 or TS2-TG2.

There is a Parrot on TG9990 or TG310997 on either TS which you can use to check your audio into the system.

If you have GPS in your radio set the GPS TG to 310999 and you would enable the GPS in the channel.

The GPS should be set to 60 seconds or more and then will send your position to the APRS whenever you talk on the channel that it is enabled on.

D-Star and Fusion should work as there meant to work and if your not familiar with them please contact us so we can connect you with someone who can help you with them.

You can listen to the repeater via Hoseline which is only traffic via RF not via network.


The 145.110- Digital Repeater is on-line and there is code plugs below.


KK4TD Repeater Code of Conduct

The KK4TD repeater is intended to be a welcoming and inclusive environment for all users. In order to ensure this, plus create an orderly and professional environment for everyone, it expected that all users will adhere to the below Code of Conduct.

This includes being:

Should anyone have questions about the Code of Conduct, please feel free to contact us.